SBS-modified bitumen waterproofing membrane with a carrier of polyester.
- Search term must have more than 2 characters.
charBIT® ELAST PV S50
Structure of product
| Carrier: | polyester |
| Lower side: | PE foil |
| Upper side: | fine sand |
| Covering: | modified bitumen |
Place of use
It is used as an underlay membrane of intermediate layer for multi-layer roof systems, waterproofing against ground moisture and in a multi-layer system against pressure water.
Package
| Quantity/roll (m2): | 5,0 |
| Quantity/pallet (m2): | 120,0 |
Technical specification
| Thickness: | 5,0 |
| Tensile strength: | 1200±200/1000±200 N/50 mm |
| Elongation: | 55±10/55±10 % |
| Temperature stability: | 100 °C |
Recommendation:
Transport and storage
The rolls of bitumen membranes are transported on pallets. They are stored in covered warehouses and placed upright so that they are not exposed to direct weather influence. Near must not be any heat source.
Method of laying
melt